Pre-Blended Mortar

Want to get 30% more cement mortar and cut your mixing time in half on your next job? Masons who have made the switch to pre-blended dry mortar mix know that it reduces waste, keeps job sites cleaner, and provides consistent, dependable results. Ditch traditional sandpile mixing and choose Amerimix pre-blended masonry mortar.

See it in Action

+ Quick View

Portland Cement, Lime & Sand Mortars
AMX 400 Series

×

Available in types N, S and M

View Details

Portland Cement, Lime & Sand Mortars

AMX 400 Series

The Amerimix AMX 400 series mortar is a factory blend of portland cement, hydrated lime and dried sand specially formulated to provide consistently excellent water retention, exceptional workability and superior bond strength in every bag. Portland cement, lime and sand mortar mix is suitable for nearly every masonry application, whether...

  • Features
  • Pre-blended formula improves yield, reduces labor costs and minimizes jobsite trash.
  • High bond strength and excellent workability.
  • Extended board life for less retempering in hot and windy climates.
  • Uses
  • Exterior or interior applications.
  • Above or below grade (Type N for above-grade use only).
  • Load bearing or non-load bearing construction.
  • Laying or resetting brick, block or stone.

+ Quick View

Masonry Cement & Sand Mortars
AMX 500 Series

×

Available in types N, S and M

View Details

Masonry Cement & Sand Mortars

AMX 500 Series

The Amerimix AMX 500 series is a factory blend of masonry cement and dried sand specially formulated to provide consistently excellent water retention, exceptional workability and superior bond in every bag. Forget the hassle of traditional sandpile mixing and choose Amerimix’s masonry cement and sand mortars for your next project!

  • Features
  • Pre-blended formula improves yield, reduces labor costs and minimizes jobsite trash.
  • High bond strength and excellent workability
  • Extended board life for less retempering in hot and windy climates.
  • Uses
  • Interior or exterior applications.
  • Above or below grade (Type N for above-grade use only).
  • Load bearing or non-load bearing construction.
  • Laying or resetting brick, block or stone.

+ Quick View

Colored Cement Mortars
AMX 405 C & AMX 505 C

×

Available in types N, S and M

View Details

Colored Cement Mortars

AMX 405 C & AMX 505 C

Amerimix AMX 405 Colored Portland Cement and Lime Mortar and AMX 505 Colored Masonry Cement Mortar are factory blended with high-quality, finely milled iron oxide pigments certified to meet ASTM C979 Standard Specifications for Pigments in Integrally Colored Concrete. Available in standard or custom colors to suit unique project requirements,...

  • Features
  • Custom formulated colors to compliment or contrast brick, block or stone.
  • Factory blended under controlled conditions for mix consistency and high bond strength.
  • Engineered for superior workability, easy tooling, and long board life.
  • Available in 36 standard colors and limitless custom-formulated colors.
  • Uses
  • Interior or exterior applications.
  • Above and below grade (Type N for above-grade use only).
  • Laying or resetting brick, block and stone.

+ Quick View

Water Repellent Mortar
AMX WRM 410 (RB) & AMX WRM 510 (RB)

×

Available in types N, S and M

View Details

Water Repellent Mortar

AMX WRM 410 (RB) & AMX WRM 510 (RB)

Part of the total RainBloc System, Amerimix AMX WRM 410 and AMX WRM 510 Water Repellent Mortars with RainBloc GP are the only mortars on the market with patented moisture-resistant admixtures that are traceable and measurable in hardened mortar. This patented waterproofing system, combined with computerized factory batching of the...

  • Features
  • Contains the only traceable, detectable and measurable water-repellant admixture on the market – RainBloc GP.
  • Computerized batching ensures RainBloc GP – and mortar mix – is proportioned correctly in every bag.
  • Exceeds water repellency requirements of the "Upload Test" specified in ASTM C1384.
  • Rated "E" for Excellent by the NCMA when used in conjunction with Echelon masonry units manufactured with RainBloc, per ASTM test E514.
  • Available in pre-mixed and custom colors.
  • Uses
  • All applications where a water-repellent mortar is required.
  • In conjunction with Echelon masonry units with RainBloc GP as part of the total RainBloc Integrated Water Repellant System.
  • Interior or exterior applications.
  • Above or below grade (Type N for above-grade use only).
  • Laying or resetting brick, block or stone.

+ Quick View

Tuck Pointing Mortar
AMX 420

×

Available in types O

View Details

Tuck Pointing Mortar

AMX 420

Amerimix AMX 420 Tuck Pointing Mortar is a factory blended formulation engineered to repair, restore, and repoint masonry structures where a low strength, Type O, repointing mortar is required such as in historical renovations. Use Amerimix AMX 420 Tuck Pointing Mortar to help repair mortar joints for your next project!

  • Features
  • Ideal for use in historical restoration projects.
  • Engineered for superior adhesion and lasting finish.
  • Can be custom pigmented to meet project requirements.
  • Uses
  • Pointing mortar joints.
  • Restoring masonry construction, including historical renovations.
  • Interior or exterior applications.
  • Above-grade applications.

AVAILABLE IN

36 STANDARD COLORS

COMPLETE THE LOOK WITH

ECHELON MASONRY

Pre-Blended Mortar FAQs

Yes. You can use Sakrete Bonder & Fortifier with a 50/50 dilution of water to product for almost every mortar. However, it cannot be used for the AMX 475, AMX 480 or AMX 485 as they are already modified.

Typical mortar joints are 3/8” thick for common joints including round, raked and flush.

The German Smear is a technique that can be done with most mortars and/or stuccos. It is all in how the individual wants to finish the surface.

Often, the terms “cement,” “concrete” and “mortar” are used almost interchangeably. The terms refer to materials that have three different purposes:

Cement: The binding element in both concrete and mortar.

Concrete: A product composed of cement, sand and gravel or other coarse aggregate. When water is mixed in with this product, it activates the cement, which is the element responsible for binding the mix together to form one solid object.

Mortar: A product composed of masonry cement (or portland cement and lime) and mason sand. When water is mixed in with this product, the cement is activated. Whereas concrete can stand alone, mortar is used to hold together bricks, stones or other building materials.

Yes.  Contact your local sales representative by clicking here.

Yes. Amerimix AMX 480 is suitable as both a mortar and grout material.