Products » Stucco

Pre-Blended Stucco Mix

Get superior adhesion and outstanding workability with our pre-blended stucco mix and ensure a quality finish that stands up to moisture and extreme temps. View our complete line of pre-mix stucco.

Request a Demo

+ Quick View

Scratch, Brown & Finish Stucco Mix
AMX 700 SBF

×

Available in types Scratch, Brown and Finish

View Details

Scratch, Brown & Finish Stucco Mix

AMX 700 SBF

Amerimix AMX 700 SBF Scratch, Brown & Finish Stucco is a smooth-finish Portland-based, factory blend of sand, cement, and proprietary chemical additives which may be used for a variety of wall assemblies.   AMX 700 SBF scratch stucco, plaster finish is specifically formulated to meet the requirements of two- and...

  • Features
  • Outstanding workability for smooth spreading and a quality finish.
  • Higher moisture retention during curing equals reduced shrinking and cracking
  • Extended mortar board life for less retempering in hot or windy climates.
  • Superior adhesion.
  • Uses
  • Scratch, brown and finish coats.
  • Two and three coat system applications.
  • Application over lath, unit masonry, precast or cast-in-place concrete.
  • Interior or exterior applications.

+ Quick View

Pumpable Premium Plus Stucco
AMX 715 PP

×

Available in types Scratch, Brown and Finish

View Details

Pumpable Premium Plus Stucco

AMX 715 PP

Amerimix AMX 715 PP Premium Plus Pumpable Stucco is a Portland-based factory blend of sand, cement, and proprietary chemical additives that can be hand- or pump-applied in scratch, brown and finish coat applications.   Specifically formulated for maximum flow stucco mix without the addition of extra water when used with...

  • Features
  • Proprietary admixtures enhance pumpability.
  • Factory blended under controlled conditions for mix consistency and greater yield.
  • Retains more moisture during curing for reduced cracking and effloresence and improved finishing.
  • Can be used in IBC and Wildland Urban Interface (WUI) fire-rated assemblies.
  • Uses
  • Scratch, brown and finish coats.
  • Ideal for high-volume applications or where water resistance is needed.
  • In applications where greater adhesion is needed.
  • Anywhere conventional stucco is used

+ Quick View

Water, Mold & Mildew Resistant Stucco Mix
AMX 710 WMMR

×

Available in types Scratch and Brown

View Details

Water, Mold & Mildew Resistant Stucco Mix

AMX 710 WMMR

Amerimix AMX 710 WMMR Water, Mold and Mildew-Resistant Stucco features a dual-action formula to resist moisture and fights the growth of stain-causing mold and mildew in scratch and brown applications.   Engineered with crystalline waterproofing technology, AMX 710 WMMR allows the wall to breathe while also being resistant to moisture,...

  • Features
  • Crystalline water-repellant technology and proprietary admixtures resist water penetration while providing breathability.
  • Higher moisture retention during curing equals reduced shrinking and cracking.
  • Extended board life means for retempering in hot or windy climates.
  • Lower air content and harder cure than conventional stucco.
  • Uses
  • Scratch and brown in 3-coat systems.
  • First coat in 2-coat systems.
  • As added protection on coastal structures.
  • In areas susceptible to driving rain and/or high humidity.
  • For added protection against mold, mildew and water penetration.

+ Quick View

Scratch & Brown Stucco
AMX 730 SB

×

Available in types Scratch and Brown

View Details

Scratch & Brown Stucco

AMX 730 SB

Amerimix AMX 730 SB Scratch & Brown Stucco is a masonry cement-based factory blend of sand, cement and proprietary chemical additives for use as the scratch coat or brown coat in a three-coat stucco scratch coat mix application. This scratch and brown coat mixture is designed for superior adhesion and...

  • Features
  • Factory blended under controlled conditions for mix consistency.
  • Superior adhesion.
  • Reduced cracking and shrinkage.
  • Extended board life.
  • Uses
  • Scratch and brown coats in 3-coat systems.
  • First coat in 2-coat systems.
  • Interior or exterior applications.

+ Quick View

Premium & Pumpable Fiber Base Coat Stucco
AMX 740 PREMIUM

×

Available in types Scratch and Brown

View Details

Premium & Pumpable Fiber Base Coat Stucco

AMX 740 PREMIUM

Amerimix AMX 740 PREMIUM Pumpable Fiber Base Coat Stucco is a portland-based, fibered factory blended stucco for scratch and brown stucco applications. Specifically formulated for maximum flow without the addition of extra water when used with mechanical pumps, AMX 740 PREMIUM reduces the incidence of shrinkage cracks typically associated with...

  • Features
  • Factory-blended under controlled conditions for mix consistency.
  • Fire rated per IBC assemblies.
  • Higher flexural strength and greater impact resistance than standard stucco.
  • Reduced cracking and shrinkage.
  • Uses
  • Scratch and brown coats in 2- and 3-coat systems.
  • Interior or exterior applications.
  • Large-scale projects where pumpability is required, including residential, commercial, and institutional/government projects.

+ Quick View

Fiber Base Coat Stucco
AMX 750 FBC

×

Available in types Scratch and Brown

View Details

Fiber Base Coat Stucco

AMX 750 FBC

Amerimix AMX 750 FBC Fiber Base Coat Stucco is a portland-based factory blend of pozzolan, durable synthetic fibers and proprietary chemical additives designed to increase application flexibility in temperatures as low as 35°F and as high as 120°F. AMX 750 FBC is also appropriate for use in insulated and non-insulated...

  • Features
  • Approved for use with 1" to 4" foam-based continuous insulation applications.
  • Able to be used across a wider range of temperatures than traditional stucco – as low as 35°F and as high as 120°F.
  • Uses
  • Hot, dry, weather applications where traditional stuccos aren't suitable.
  • Scratch and brown coats in 3-coat systems.
  • First coat in 2-coat systems.
  • One-coat applications.
  • Over continuous insulation from 1" - 4".
  • Fast track projects where labor savings are desired.

+ Quick View

Fiber Base Coat Concentrate Stucco
AMX 755 FBCC

×

Available in types Scratch and Brown

View Details

Fiber Base Coat Concentrate Stucco

AMX 755 FBCC

Amerimix AMX 755 FBCC Fiber Base Coat Concentrate Stucco is a concentrated Portland-based, durable synthetic stucco fiber blend of pozzolan and proprietary chemical additives designed to be used in both insulated and non-insulated one-coat systems and conventional scratch and brown applications.

  • Features
  • Concentrated mixture delivers high yield when combined with clean dried sand in the field.
  • Factory blended for mix consistency.
  • Higher water retentivity than standard mixes reduces cracking and shrinkage.
  • Uses
  • In projects where sand piles are readily available (ratio of 200 - 240 lbs sand per bag).
  • Scratch and brown coats in 3-coat systems.
  • First coat in 2-coat systems.
  • One-coat applications.
  • Over continuous insulation from 1" - 4".
  • Application over wood or steel framing, solid substrates, masonry, and continuous insulation when used over lath following ASTM C1063.

+ Quick View

Textured Finish Stucco
AMX 780 T

×

Available in types Finish

View Details

Textured Finish Stucco

AMX 780 T

Amerimix AMX 780 T Textured Finish Stucco is a rough finish, factory-blended Portland-based stucco for use as a textured finish stucco mix in one-, two- or three-coat systems. Engineered to provide excellent workability and allow for the creation of a variety of textured finishes, AMX 780 T can also be...

  • Features
  • Factory blended for mix and finish consistency.
  • Paintable.
  • Superior workability.
  • Integral component in a number of fire-rated 3-coat assemblies.
  • Uses
  • Finish coat in 1-, 2- and 3-coat systems.
  • Creating a variety of textured finishes.
  • Painted projects.

+ Quick View

Texture Sand Finish Stucco
AMX 790 SSF

×

Available in types Finish

View Details

Texture Sand Finish Stucco

AMX 790 SSF

Amerimix AMX 790 SSF Sand Texture Finish Stucco is a factory-blended, Portland-based smooth stucco mix for use as a textured finish coat in one-, two- or three-coat systems. Engineered to deliver a ‘sand’ or ‘floated’ stucco finish, AMX 790 SSF can also be painted with coatings designed for high pH...

  • Features
  • Factory blended for mix and finish consistency.
  • Paintable.
  • Superior workability.
  • Uses
  • Finish coat in 1-, 2- and 3-coat systems.
  • Scratch and brown coats in 2- and 3-coat systems.
  • One-coat systems.
  • Creating smooth-textured ("sand" or "floated") finishes.
  • Painted projects.
  • Over precast concrete.

+ Quick View

Colored Stucco Mix
AMX 775C

×

View Details

Colored Stucco Mix

AMX 775C

Amerimix AMX 775 C Colored Stucco is a Portland-based stucco factory blended with finely-milled pigments to ensure precise, consistent, durable stucco finish colors in scratch, brown and finish coat applications.   Available in select regions only, AMX 775 C is available in 20 standard stucco colors, such as white, beige,...

  • Features
  • Factory blended for color and mix consistency.
  • Finely-milled pigments deliver durable, lasting color.
  • Added water-repellant admixtures deliver excellent water resistance.
  • High lime content for superior workability.
  • Uses
  • Scratch, brown, and finish coats in projects where colored stucco is desired.
  • Excellent for humid coastal applications.
  • Over all masonry surfaces or lath.
  • For additions, renovations, and new construction

AVAILABLE IN

24 STANDARD COLORS

Request a Color Card

COMPLETE THE LOOK WITH

ECHELON MASONRY

VISIT ECHELON WEBSITE

Stucco FAQs

Yes, typically after 7 days for latex based paint, but contact the manufacturer of the paint for their recommendations.

No, lathe would be required for proper mechanical bond.

Yes. You can use Sakrete Bonder & Fortifier with a 50/50 dilution of water to product.

Yes.

There are three general guidelines for every stucco system: First there are broad national specifications to consider: EIFS and conventional stucco applications are part of the International Building Code (IBC).

Next there are specialty codes (fire & energy) and ASTM standards that apply.

And finally one-coat stucco systems – like Amerimix 740 Fiber Base Coat – will have an IAPMO report as an application guideline. Amerimix’s IAPMO Report is #427.

The applicator has sand piles delivered to the jobsite along with pallets of cement – they can blend together in a mixer.